How To Flash Coolpad dazen 8297L 100 fix error at 11% Download Firmware Inside

CoolPad Dazen 1 8297L-100 in problems of auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock, i try with reset device but not success problem not done same issue then decide to full flash and it's working well without any try problem just plug device and done, If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 70%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, sd card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

• Related Post : CoolPad Dazen 1 8297L-100 Hard Reset

CoolPad Dazen 1 8297L-100 in any type issue software related you can easy solve using this method and this is for everyone who new fresher technician or experience technician in android software related, before use remember of must be working well all are required which you can see in this method it below to be mention, different to be error when you try to flash or upgrade first of USB not recognized this error possible when micro USB not working, battery not charged, phone USB socket not working properly so if you fail with this method just write down your comment on below comment box i will soon possible to fix it, first take backup into device if live otherwise dead you can't take backup, this method use when device in dead condition also but must be in software problem in hardware device not be live

Requirement for CoolPad Dazen 1 8297L-100

• CoolPad Dazen 1 8297L-100 phone with good battery charged, do not try with low battery
• CoolPad Dazen 1 8297L-100 Stock ROM Firmware Tested | Download here
• CoolPad Dazen 1 8297L-100 Flash tool | Download here
• CoolPad Dazen 1 8297L-100 USB Driver | Download here
• Micro USB Cable with Good Quality
• Computer or Laptop

Procedure for CoolPad Dazen 1 8297L-100

• First Downloading required from above link, if link not working just leave your comment on below comment box i will soon fix it if possible
• Extract to anywhere you want or Desktop from the WinRAR, must be installed WinRAR software in your computer or laptop
• Open YGDP_Setup_V3.98_Assembly folder and choose .exe file and install it
• Open YGDP_Assembly.exe file from the C:\YLXZGJ\YGDP path
• Type PassWord : 369 and Hit Enter key
• Click on Config button and Click on CPB file folder option and select 4.4.120.00.T1.150511.8297L_I00.def.CPB file from the Firmware folder
• Click on Apply button and Wait until Read file
• Now Click on Star button and Press and hold Volume Up and Insert usb cable Again Press Volume up for download mode confirm
  Insert USB Cable, Wait until Driver Installing already driver installed in your computer or laptop then downloading start automatically
• Wait until finished process, do not disconnect device while in flashing mode
• Congratulation you are done

CoolPad Dazen 1 8297L-100 Flash done Screenshot: